|
|
| |
|
 |
While others have focused on "how the ball rises" (launch angle) a technology nearly peaked, we have guided our efforts towards understanding "how the ball falls" (angle of descent). Maxing out this parameter is the difference in Carry and Roll, which is what you’re after, "Net total yards." To peak out in this area we have incorporated the use of Carbon Nano- tubes that are combined with resin to dramatically increase the strength and improve alignment of the carbon fibers, allowing us to soften or (thin out) the center most section of the shaft to get the ball to fly flat for most of it's hang time, allowing for this shallower angle of descent that produces "Tour Quality Roll."
|
Flex |
Freq. |
Weight |
Tip Dia. |
Butt Dia. |
Length |
Tip Par. |
Torque |
Spin |
Launch Angle |
|
R |
247 |
62g. |
.335 |
.600 |
46” |
4.5” |
3.2º |
Low |
Mid |
|
S |
257 |
64g. |
.335 |
.600 |
46” |
4.5” |
3.2º |
Low |
Mid |
|
X |
267 |
66g. |
.335 |
.600 |
46” |
4.5” |
3.2º |
Low |
Mid |
CLICK HERE to read an article about Shaft Torque |
| |
 |
| Average Rating: |  | 5.0 | based on 3 Customer Reviews |
|  |
|
Review On Nov 11, 2009 by Dwayne Richards of Morgan Hill, CA
|
| Rating: |
|
| Title: |
Full Force Shaft |
| Comments: |
David,
A while back I asked you about putting a .335 shaft in an R7 head.
Well I got the sleeve from Billy Bob's and installed the 62S
Tour Deep in my friends driver. He has complained about no distance
with his driver for a year. He is a strong golfer and hits the longest 3
irons
of anyone I've played with. They go like bullets. Well I played with him
last week and got to see him hit the R7 with the Fierce shaft. His hits were
awesome and dead straight. He once again enjoys his driver. I know he spent
big bucks for the TaylorMade so was reluctant to give it up. Putting that
Fierce shaft in made all the difference in the world. He said he would
gladly
give a testimonial about how great the shaft is. You can make one up from my
email and sign it Larry L. San Jose, CA. By the way during the round we
came
to the 18th hole which is a long uphill par 4 to an elevated green. We
play there
every week and in 3 years I have never reached the green in 2. I hit my
drive
with the Vector TS with the Fierce Full Force 49A and proceeded to hit
my second
with the guys still putting on the green because I knew it wouldn't
reach. I hit
my old Warlord 16 degree I got from you and sent it between their legs and
about 25 ft. past the hole. I apologized to them but they wouldn't
believe I never
get on it 2. I guess the driver got me closer than I thought.
Thanks,
Dwayne
|
|
|
Review On Nov 11, 2009 by Jeff Farley of Huntington Beach, CA
|
| Rating: |
|
| Title: |
Fierce Full Force Shaft |
| Comments: |
“I used the Fierce shaft to hit a drive 390 yards at the ReMax World Finals. Players of all skill level can benefit by using the Fierce shaft for better accuracy and distance!”
Jeff Farley
|
|
|
Review On Oct 26, 2009 by Dwayne Richards of San Jose, CA
|
| Rating: |
|
| Title: |
Full Force |
| Comments: |
I have a testimonial for you from Larry L. in San Jose.
He has been hitting a TaylorMade R7 and it goes nowhere.
He is a strong hitter and still hits a 3 iron like a bullet. I replaced
his .350 OEM shaft with your TourDeep 66S which is .335. Used
a Billy Bob connector. His driving has been phenomenal. No fade
or draw just pure and straight. If anybody wants to hit their TaylorMade
longer they need to switch to one of your shafts. I personally have your
FullForce 49A with a Vector TS head with a 30 gram backweight as
my driver and have reached some bunkers off the tee that normally are
out of reach for me. I own about 12 drivers with every kind of shaft
and this setup is so far the best. |
|
|
|
|
|
